34 | Cheetah 36XL Product Manual, Rev. E |
6.4.4.2Vibration
a.
The drive as installed for normal operation, shall comply with the complete specified performance while subjected to continuous vibration not exceeding
Vibration may be applied in the X, Y, or Z axis.
b.
Equipment as installed for normal operation shall not incur physical damage while subjected to periodic vibration not exceeding:
Vibration may be applied in the X, Y, or Z axis.
Vibration occurring at these levels may degrade operational performance during the abnormal vibration period. Specified operational performance will continue when normal operating vibration levels are resumed. This assumes system recovery routines are available.
c.
The limits of
The drive shall not incur physical damage or degraded performance as a result of continuous vibration not exceeding
Vibration may be applied in the X, Y, or Z axis.
6.4.5Air cleanliness
The drive is designed to operate in a typical office environment with minimal environmental control.
6.4.6Acoustics
Sound power during idle mode shall be 3.8 bels typical when measured to ISO 7779 specification.
There will not be any discrete tones more than 10 dB above the masking noise on typical drives when mea- sured according to Seagate specification
6.4.7Electromagnetic susceptibility
See Section 2.1.2.