Manuals / Seagate / Computer Equipment / Computer Drive

Seagate ST9146803SS, ST9300603SS Relative humidity, Effective altitude sea level a. Operating

Models: ST9146803SS ST9300603SS ST9300503SS ST9146603SS ST9146703SS ST9300403SS

1 78

Download 78 pages 11.24 Kb

Page 39

Figure 23. Location of the HDA temperature check point

The maximum allowable HDA case temperature is 60°C. Operation of the drive at the maximum case tem- perature is intended for short time periods only. Continuous operation at the elevated temperatures will reduce product reliability.

b.Non-operating

–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 86°F (30°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive.

HDA Temp.

Check Point

Figure 23. Location of the HDA temperature check point

7.4.2Relative humidity

The values below assume that no condensation on the drive occurs.

a.Operating

5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour.

b.Non-operating

5% to 95% non-condensing relative humidity.

7.4.3Effective altitude (sea level) a. Operating

–1,000 to +10,000 feet (–304.8 to +3,048 meters) b. Non-operating

–1,000 to +40,000 feet (–304.8 to +12,210 meters)

7.4.4Shock and vibration

Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent, it may be necessary to modify the enclosure to minimize drive movement.

The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in Figure 24, and in accordance with the restrictions of Section 11.3.

Savvio 10K.3 SAS Product Manual, Rev. G

31

Image 39

Seagate ST9146803SS, ST9300603SS manual Relative humidity, Effective altitude sea level a. Operating, Shock and vibration

Contents

Product Manual ST9300603SSST9300503SS ST9146803SSST9146703SSST9300403SS ST9146603SS Savvio 10K.3 SASPage 6.0 Reliability specifications Contents1.0 Seagate Technology support services 2.0 Scope 5.0 Performance characteristics12.0 Interface requirements 10.0 Defect and error management11.0 Installation 8.0 About FIPS 9.0 About self-encrypting drivesSavvio 10K.3 SAS Product Manual, Rev. G Savvio 10K.3 SAS Product Manual, Rev. G List of Figures Page SEAGATE ONLINE SUPPORT and SERVICES 1.0 Seagate Technology support servicesFIPS 140-2 Level 2 certified 2.0 ScopeModel Number Self-Encrypting Drive SED3.1.1.1 Electromagnetic susceptibility 3.0 Applicable standards and reference documentation3.1 Standards 3.1.1 Electromagnetic compatibilityKorean MIC 3.1.2 Electromagnetic complianceElectromagnetic compliance for the European Union Australian C-Tick3.1.3 European Union Restriction of Hazardous Substances RoHS Reference documents4.0 General description 4.2 Media description 4.1 Standard features4.6 Programmable drive capacity 4.3 Performance4.4 Reliability 4.5 Formatted capacities4.7 Factory-installed options 5.2.1 Access time 5.0 Performance characteristics5.1 Internal drive characteristics 5.2 Seek performance characteristicsST9300603SS 5.3 Start/stop time5.2.2 Format command execution time for 512-byte sectors minutes 5.2.3 General performance characteristics5.4 Prefetch/multi-segmented cache control 5.5 Cache operation5.5.1 Caching write data 5.5.2 Prefetch operation 6.1.2 Unrecoverable Errors 6.0 Reliability specifications6.1 Error rates 6.1.1 Recoverable Errors6.2.2 Preventive maintenance 6.2 Reliability and service6.1.3 Seek errors 6.1.4 Interface errors6.2.4 S.M.A.R.T Maximum processing delayOn-line only delay Fully-enabled delayParameter Code Table 1 Temperature Log Page 0DhPredictive failures 6.2.5 Thermal monitor6.2.6.2 Implementation 6.2.6.2.1 State of the drive prior to testing6.2.6 Drive Self Test DST 6.2.6.1 DST failure definition6.2.6.2.4 Log page entries 6.2.6.2.3 Short and extended testsShort test Function Code 001b Extended test Function Code 010b6.2.7 Product warranty ShippingProduct repair and return information 7.0 Physical/electrical specifications 7.1 AC power requirements7.2 DC power requirements Savvio 10K.3 SAS Product Manual, Rev. G 3 See +12V current profile in Figure General DC power requirement notes 7.2.2 Power sequencing7.2.1 Conducted noise immunity Figure 17. Current profiles for 300GB models 7.2.3 Current profilesFigure 18. Current profiles for 146GB models 300 GB models in 3 Gbit operation 7.3 Power dissipation300GB models in 6 Gbit operation 146GB models in 3 Gbit operation 7.4 Environmental limits 7.4.1 Temperature a. Operating146GB models in 6 Gbit operation 7.4.4 Shock and vibration Figure 23. Location of the HDA temperature check point7.4.2 Relative humidity 7.4.3 Effective altitude sea level a. OperatingDrop height Packaged/product weight7.4.4.1 Shock Package sizeFigure 24. Recommended mounting 7.4.4.2 Vibration a. Operating-normal7.4.8 Electromagnetic susceptibility 7.4.5 Air cleanliness7.4.6 Corrosive environment 7.4.7 Acoustics7.5 Mechanical specifications Figure 25. Mounting configuration dimensionsin mm in mm 8.0 About FIPS PurposeLevel 2 security 9.2.1 Admin SP 9.2 Controlled access9.0 About self-encrypting drives 9.1 Data encryption9.2.3 Default password 9.3 Random number generator RNG9.4 Drive locking 9.5 Data bands9.6 Cryptographic erase 9.7 Authenticated firmware download9.8 Power requirements 9.9 Supported commands10.0 Defect and error management 10.1 Drive internal defects/errors10.2 Drive error recovery procedures Maximum recovery time per 10.3 SAS system errorsTable 4 Read and write retry count maximum recovery times Maximum recovery time per10.4 Background Media Scan 10.5 Media Pre-Scan10.6 Deferred Auto-Reallocation 10.7 Idle Read After Write 11.1 Drive orientation 11.0 InstallationFigure 28. Air flow 11.2 Cooling11.3 Drive mounting 11.4 GroundingK x X = F 15lb = 67N SAS task management functions supported 12.1 SAS features12.0 Interface requirements 12.1.1 task management functions12.2 Dual port support Supported commands 12.3 SCSI commands supportedSupported commands Supported commands Supported commands Bytes 12.3.2 Mode Sense data12.3.1 Inquiry data Savvio inquiry dataSavvio 10K.3 SAS Product Manual, Rev. G CHG = Changeable bits indicates if default value is changeable3. Current values 4. Changeable valuesTable 9 Mode Sense data for 300GB drives Savvio 10K.3 SAS Product Manual, Rev. G Table 10 Mode Sense values for 146GB drives12.4 Miscellaneous operating features and conditions Miscellaneous featuresMiscellaneous status Figure 29. Physical interface 12.4.1 SAS physical interfaceC OF DATUM B Figure 30. SAS device plug dimensionsTO DATUM A Figure 31. SAS device plug dimensions detail12.4.5 Pin descriptions 12.4.2 Physical characteristics12.4.3 Connector requirements 12.4.4 Electrical description12.5.1 Ready LED Out 12.5 Signal characteristics12.4.7 Power 12.4.6 SAS transmitters and receivers12.5.2 Differential signals 12.6 SAS-2 Specification compliance12.7 Additional information LED drive signalSavvio 10K.3 SAS Product Manual, Rev. G Index NumericsPage Page See also cooling Page Seagate Technology LLC