Shock | Seagate ST9600104SS, ST9600204SS, ST9450304SS, ST9450404SS

6.5.4.1Shock

a.Operating—normal

The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding:

•40 Gs at a maximum duration of 11ms (half sinewave)

•25 Gs at a maximum duration of 2ms (half sinewave)

Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds.

b.Non-operating

The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes both isolated drives and integrated drives.

The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device damage or performance degradation.

•80 Gs at a maximum duration of 11ms (half sinewave)

•400 Gs at a maximum duration of 2ms (half sinewave)

•300 Gs at a maximum duration of 0.5ms (half sinewave)

Shock may be applied in the X, Y, or Z axis.

Savvio 10K.4 SAS Product Manual, Rev. A

33

Image 41

Seagate ST9600104SS, ST9600204SS, ST9450304SS, ST9450404SS manual Shock

Contents

Standard Models Self-Encrypting Drive Models ST9600204SSST9600104SS ST9450404SSST9450304SS Rev. a 12/15/09 Initial release Revision history Contents Installation Defect and error managementAbout self-encrypting drives Interface requirements Seagate Technology support services Savvio 10K.4 SAS Product Manual, Rev. a List of Figures Page Scope Standards Applicable standards and reference documentationElectromagnetic compatibility Electromagnetic susceptibility Electromagnetic compliance for the European Union Electromagnetic complianceAustralian C-Tick Korean KCC European Union Restriction of Hazardous Substances RoHS Reference documents General description Media description Standard features Reliability PerformanceFormatted capacities Programmable drive capacity Factory-installed options Internal drive characteristics Performance characteristicsSeek performance characteristics Access time Start/stop time General performance characteristics Caching write data Prefetch/multi-segmented cache controlCache operation Prefetch operation Error rates Reliability specificationsRecoverable Errors Unrecoverable Errors Seek errors Reliability and serviceInterface errors Preventive maintenance 4 S.M.A.R.T Maximum processing delay Fully-enabled delayControlling S.M.A.R.T Performance impact Thermal monitor Temperature Log Page 0Dh Parameter Code DescriptionPredictive failures Drive Self Test DST State of the drive prior to testingDST failure definition Implementation Short test Function Code 001b Short and extended testsExtended test Function Code 010b Log page entries Product repair and return information Product warrantyShipping PowerChoice modes Physical/electrical specificationsPowerChoiceTM power management DC power requirements AC power requirements Savvio 10K.4 SAS Product Manual, Rev. a Page Page Conducted noise immunity General DC power requirement notesPower sequencing Current profiles for 600GB models Current profiles Current profiles for 450GB models GB models in 3Gb operation Power dissipation 600GB models in 6Gb operation 450GB models in 3Gb operation 450GB models in 6Gb operation Temperature a. OperatingEnvironmental limits Shock and vibration Relative humidityEffective altitude sea level a. Operating Shock Recommended mounting Corrosive environment Air cleanlinessVibration a. Operating-normal Acoustics Mounting configuration dimensions Mechanical specifications Admin SP Controlled accessAbout self-encrypting drives Data encryption Random number generator RNG Default passwordDrive locking Data bands Power requirements Authenticated firmware downloadSupported commands Cryptographic erase Drive error recovery procedures Defect and error managementDrive internal defects/errors SAS system errors Deferred Auto-Reallocation Background Media ScanMedia Pre-Scan Idle Read After Write Drive orientation Installation Air flow Cooling Grounding Drive mounting Interface requirements SAS features Dual port support Supported commands Scsi commands supported Supported commands Supported commands Supported commands Savvio inquiry data Mode Sense dataInquiry data Page Mode Pages Mode Sense data for ST9600204SS and ST9600104SS drives Mode Sense values for ST9450404SS and ST9450304SS drives Miscellaneous status Miscellaneous operating features and conditionsMiscellaneous features SAS physical interface Datum B Section C C Section a a Connector requirements Physical characteristicsElectrical description Pin descriptions Power Signal characteristicsSAS transmitters and receivers Ready LED Out LED drive signal SAS-2 Specification complianceDifferential signals General interface characteristics Internet Seagate Technology support servicesPresales Support Technical Support Data Recovery Services Call Center Toll-free Direct dialFAX Warranty ServiceData Recovery Services Authorized Service Centers Numerics Index KCC Msid Mtbf See also cooling Page Savvio 10K.4 SAS Product Manual, Rev. a Page Seagate Technology LLC