Scope | Seagate ST9600104SS, ST9600204SS, ST9450304SS, ST9450404SS

1.0Scope

This manual describes Seagate Technology® LLC, Savvio® 10K.4 SAS (Serial Attached SCSI) disc drives.

Savvio drives support the SAS Protocol specifications to the extent described in this manual. The SAS Inter- face Manual (part number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives. The Self-Encrypting Drive Reference Manual, part number 100515636, describes the interface, general operation, and security features available on Self-Encrypting Drive models.

Note. Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models before a differentiation between drive-based encryption and other forms of encryp- tion was necessary.

Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual may not be predictive of future generation specifications or requirements. If you are designing a system which will use one of the models listed or future generation products and need further assistance, please contact your Field Applications Engineer (FAE) or our global support services group as shown in Section 11.0.

Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.

Model Number	Self-Encrypting Drive (SED)

ST9600204SS	No

ST9450404SS	No

ST9600104SS	Yes

ST9450304SS	Yes

Savvio 10K.4 SAS Product Manual, Rev. A

1

Image 9

Seagate ST9600104SS, ST9600204SS, ST9450304SS, ST9450404SS manual Scope

Contents

Standard Models Self-Encrypting Drive Models ST9600204SSST9600104SS ST9450404SSST9450304SS Rev. a 12/15/09 Initial release Revision history Contents Installation Defect and error managementAbout self-encrypting drives Interface requirements Seagate Technology support services Savvio 10K.4 SAS Product Manual, Rev. a List of Figures Page Scope Standards Applicable standards and reference documentationElectromagnetic compatibility Electromagnetic susceptibility Electromagnetic compliance for the European Union Electromagnetic complianceAustralian C-Tick Korean KCC European Union Restriction of Hazardous Substances RoHS Reference documents General description Media description Standard features Reliability PerformanceFormatted capacities Programmable drive capacity Factory-installed options Internal drive characteristics Performance characteristicsSeek performance characteristics Access time Start/stop time General performance characteristics Prefetch/multi-segmented cache control Cache operationCaching write data Prefetch operation Error rates Reliability specificationsRecoverable Errors Unrecoverable Errors Seek errors Reliability and serviceInterface errors Preventive maintenance 4 S.M.A.R.T Maximum processing delay Fully-enabled delayControlling S.M.A.R.T Performance impact Temperature Log Page 0Dh Parameter Code Description Predictive failuresThermal monitor Drive Self Test DST State of the drive prior to testingDST failure definition Implementation Short test Function Code 001b Short and extended testsExtended test Function Code 010b Log page entries Product warranty ShippingProduct repair and return information Physical/electrical specifications PowerChoiceTM power managementPowerChoice modes DC power requirements AC power requirements Savvio 10K.4 SAS Product Manual, Rev. a Page Page General DC power requirement notes Power sequencingConducted noise immunity Current profiles for 600GB models Current profiles Current profiles for 450GB models GB models in 3Gb operation Power dissipation 600GB models in 6Gb operation 450GB models in 3Gb operation Temperature a. Operating Environmental limits450GB models in 6Gb operation Relative humidity Effective altitude sea level a. OperatingShock and vibration Shock Recommended mounting Air cleanliness Vibration a. Operating-normalCorrosive environment Acoustics Mounting configuration dimensions Mechanical specifications Admin SP Controlled accessAbout self-encrypting drives Data encryption Random number generator RNG Default passwordDrive locking Data bands Power requirements Authenticated firmware downloadSupported commands Cryptographic erase Defect and error management Drive internal defects/errorsDrive error recovery procedures SAS system errors Background Media Scan Media Pre-ScanDeferred Auto-Reallocation Idle Read After Write Drive orientation Installation Air flow Cooling Grounding Drive mounting Interface requirements SAS features Dual port support Supported commands Scsi commands supported Supported commands Supported commands Supported commands Mode Sense data Inquiry dataSavvio inquiry data Page Mode Pages Mode Sense data for ST9600204SS and ST9600104SS drives Mode Sense values for ST9450404SS and ST9450304SS drives Miscellaneous operating features and conditions Miscellaneous featuresMiscellaneous status SAS physical interface Datum B Section C C Section a a Connector requirements Physical characteristicsElectrical description Pin descriptions Power Signal characteristicsSAS transmitters and receivers Ready LED Out LED drive signal SAS-2 Specification complianceDifferential signals General interface characteristics Internet Seagate Technology support servicesPresales Support Technical Support Warranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dialFAX Numerics Index KCC Msid Mtbf See also cooling Page Savvio 10K.4 SAS Product Manual, Rev. a Page Seagate Technology LLC