Sealife DIGITAL FLASH manual Using the Digital Flash variable power adjustment

Using the Digital Flash variable power adjustment:

If the test image is over exposed (white or washed out colors), turn the power adjust- ment clockwise to the first “bar” and take another picture. Do this until the image exposure is satisfactory. If the test image is under exposed (dark), make sure the power adjustment is on full power (com- pletely counter clock-wise). If the power adjustment is turned to full power, and the image is under exposed, it normally indi- cates the subject is too far away, beyond the reach of the Digital Flash or the flash did not fire. The maximum reach is 6 to 8ft (2.5m) depending on water visibility.

Note: If the Digital Flash did not fire, refer to the trouble shooting guide in section IX.

29