Sears 113=235240 manual Basic Saw Operations, Model 113.235220 & 113.235240 Compound, Bevel Cut

Basic Saw Operations (Continued)

Miter Cut

When a miter cut is required, loosen the miter lock knob, depress the index spring, and move the saw to the desired angle, Retighten miter lock knob Do not stand in front of the saw table Move with the handle to the miter angle to make the cut

E

/

/

I_._

Bevel Cut

Model 113.235220 & 113.235240 Compound

Miter Saw Only:

When a bevel cut is required, loosen bevel lock knob, tilt the blade to desired bevel angle Lock the bevel lock knob. Stand to the left side of the handle to make the cut.

BEVEL

LOCK KNOB

Overriding the Bevel Stops

Use the 0° and 45= bevel stops for precise, repeatable bevel indexing,

Occasionally, when cutting a bevel or compound cut, you may need to set the bevel angle a small amount beyond the 0 ° or 45° bevel stop, This is very easily

done by pulling the bevel index pin out and locking the bevel knob,

BEVELINDEX

STOPS

WiTHMITER

MOVE FEET

ANGLEt

BEVELINDEX

PiN

REAR, BOTTOM

VIEW FROM BACK

17