Unpacking and Checking Contents
Tools Needed
ii u
Tools required for alignment:
1 Combination Square
2 Combination wrench, !/4" Hex "L" wrench with #2 phillips tip (supplied)
QUARE | 1/2 'tSOCKET & |
| SOCKET WRENCH |
J
HEX "L" W/PHILLIPS WRENCH (SUPPLIED)
COMBINATION SQUARE MUST BE TRUE
DRAW LIGHT | STRAIGHT EDGE OF |
LINE ON BOARD | BOARD 3/4" THICK |
ALONGTH,SEO
SHOULD BE NO GAP OR OVERLAP
WHEN SQUARE IS FLIPPED
OVER IN DOTTED POSITION
Unpacking
WARNING: To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during
unpacking and assembly. This cord must remain unplugged whenever you are working on the saw,
Model 113235220, 113 235240 and 113.235t10 Miter saws, are each shipped complete in one box
NOTE: This manual gives instructions for both 113 235220 & 113235240 compound miter saw and
113235110 nomcompound miter saw The two saws are very similar in design and function Many parts are identical. The illustrations will reflect the compound miter saw when describing most applications.
Illustrations of the
saw
to avoid back injury, get help whenever you I WARNING:havetolift theAlthoughsawmoresmall,thanthis10 inchessawis. heavy,
1Remove the miter saw from the carton by lifting the saw by the carry handle.
WARNING: If any part is missing or damaged, do not plug the saw in until the missing or damaged part is correctly replaced° To avoid electric shock, use only identical replacement parts when servicing double insulated tools.
2Place the saw on a secure stationary work surface and look the saw over carefully
List of Loose Parts |
|
| A |
A Basic Saw Assembly | 1 |
B Owners Manual Form | 1 |
C Dust Elbow | 1 |
