Sears 125.15884800 owner manual Step

Step 4

Set the burner assembly onto the cabinet as shown.

IMPORTANT: The burner tube must slide properly onto the gas valve orifice as shown.

Step 5

Secure the burner assembly with the three 1/4-20 X 5/8” bolts from the inside of the cabinet. Securely tighten the bolts.

Step 6

Attach the loose igniter wire to the igniter on the control panel as shown below.

Note: With the help of a friend, turn the smoker body to its upright position. Try to minimize stress on legs.

CAUTION: Make sure the valve gas orifice slides and fits into the burner tube.

Step 7

Set the smoke stack on top of the cabinet and line it up with the corresponding holes. Insert three 10-24 X 5/8” bolts through smoke stack base and into cabinet. Secure with three 10-24 flange nuts.

Burner Tube

Igniter

Gas Valve

Orifice

8