Sears 149.213340 warranty TOOLS REQUmRED, Unpackrng And Checkung Contents, Table Of Loose Parts

TOOLS REQUmRED

8-inch Adjustable

MalletWrench

UNPACKRNG AND CHECKUNG CONTENTS

Model 149213340 Radial Drill Press is shipped complete in one carton Carefully unpack and separate parts from packing material Check loose parts against Table of Loose Parts on page 5 and parts list on page 15 If any parts are missing or damaged, do not attempt to assemble Radial Drill Press, plug in power cord or turn on power switch until replacement parts are obtained and properly installed

Some parts such as the table and base are coated with rust preven- tative that can be removed with a soft cloth soaked in kerosene Do

not use acetone, gasoline, or lacquer thinner; these are dangerous

and may also damage the plastic and rubber parts of the Radial Drill

Press

Apply a coating of paste wax to the table and base work surfaces

I

								TABLE OF LOOSE PARTS
REF
NO.	DESCRIPTION							QTY.
1	Base Assembly							1
4	CoIumn			and		Flange Assembly		1
5	M8 x 25mm					Hex Head	Bolls	4
6 & !6	Table		Bracket and Table					1
9	Worm			Pinion				1
15	Vertical			Rack				1
10	Lig	Handle						1
--	Drill	Head			Assembly			1	46
!4	Lock		Handles					3
37 & 38	Handle			Bars		and Knobs		3
46	Chuck			and Key				1
96	5/16-18			x 5"		Carriage	Bolts	2
97	5/16-18 Wing Nuts							2
95	Owner's Manual (not shown)							1
98	5/32"		Hex		Handle			1
99	3mm		Hex		Handle			1
88	Lock		Shoe		wilh Recess			1

Drill Head

15