SAFETY INSTRUCTIONS cont.

SPECIFIC SAFETY RULES FOR CORDLESS DRILL / DRIVERS cont.

14.Do not charge battery pack in a damp or wet location. Following this rule will reduce the risk of electric shock.

15.For best results, your battery pack should be charged in a location where the temperature is more than 50°F but less that 100°F. Do not store battery outside or in vehicles.

16.Under extreme usage or temperature conditions, battery leakage may occur.

If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.

17.Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury.

SAFETY RULES FOR BATTERY CHARGER STAND/ TRANSFORMER

!WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and / or serious personal injury.

NOTE: Before using battery charging stand/transformer, read all instructions and cautionary markings in this manual, on battery charging stand/transformer, battery pack, and drill/driver using battery pack to prevent misuse of the products and possible injury or damage.

!CAUTION: USE ONLY the specifically designated charging stand/transformer that was supplied with this drill/driver when charging the battery pack. The use of any other charging stand/transformer could damage the battery pack and create a hazardous condition.

!CAUTION:To reduce the risk of electric shock or damage to the charging stand/transformer and battery pack, charge only the specifically designated Companion battery pack that was included with this drill/driver and the charging stand/transformer. Charging other types of battery packs may cause them to burst, causing personal injury and damage.

1.Do not use the charging stand/transformer outdoors or expose to wet or damp conditions. Water entering charging stand will increase the risk of electric shock.

2.Use of an attachment with this charging stand/transformer that is not recommended may result in a risk of fire, electric shock, or injury to persons.

8

SAFETY INSTRUCTIONS cont.

SAFETY RULES FOR BATTERY CHARGER STAND/ TRANSFORMER cont.

3.Do not abuse the cord on the charging stand. Never carry the charging stand/ transformer by its power cord. Never pull the power cord to remove the transformer from the power outlet. Damage to the cord or charging stand/transformer could occur and create an electric shock hazard. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

4.Make sure cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, heat, oil, or otherwise subjected

to damage or stress. This will reduce the risk of accidental falls, which could cause injury, and damage to the cord which could result in electric shock.

5.Keep cord and charging stand/transformer away from heat to prevent damage to housing or internal parts.

6.Do not let gasoline, oils, petroleum-based products, etc. come in contact with plastic parts. They contain chemicals which can damage, weaken or destroy plastic.

7.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure: a) That pins on plug of extension cord are the same number, size and shape as those of transformer on charger, b) That extension cord is properly wired and in good electrical condition, and c) That you use a proper extension cord. ONLY use cords listed by Underwriters Laboratories (UL). Other extension cords can cause a drop in line voltage, resulting in a loss of power and overheating of charging stand/transformer. An AWG (American Wire Gauge) size of at least 14-gauge is recommended for an extension cord of 25-ft. or less in length. Use 12-gauge for an extension cord of 50-ft.Extension cords 100-ft. or longer are not recommended.

8.INSPECT tool cords for damage. Do not operate charging stand with a damaged cord or transformer, which could cause shorting and electric shock. Have damaged tool cords repaired at a Sears Service Center.

9.Do not operate charging stand/transformer if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized serviceman for electrical check to determine if the charging stand/transformer is in good working order.

10.Do not disassemble charging stand/transformer. Take it to a Sears Parts and Repair Center when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

11.Disconnect charging stand/transformer from the power supply when not in use.

This will reduce the risk of electric shock or damage if metal items should fall into the opening in the charging stand. It also will help prevent damage during a power surge.

12.Risk of electric shock. Do not touch un-insulated portion of output connector or un-insulated battery terminal.

13.Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury.

9

10-4-07 Drill

10300-10400

Page 4 Page 6
Page 5
Image 5
Sears 172.104 Specific Safety Rules for Cordless Drill / Drivers, Safety Rules for Battery Charger STAND/ Transformer
Page 4 Page 6

172.104, 172.103 specifications

The Sears 172.103 and 172.104 are two notable models in the Sears line of home appliances, specifically designed to meet the needs of modern households while delivering reliability and efficiency. Both models are renowned for their robust construction, user-friendly interfaces, and a range of features that cater to the demands of everyday living.

One of the standout characteristics of the Sears 172.103 and 172.104 is their energy efficiency. These models comply with strict energy conservation standards, making them eco-friendly options for consumers looking to reduce their carbon footprint and energy bills. Both units are equipped with advanced energy management systems that intelligently monitor and adjust their power consumption based on usage patterns.

In terms of technology, the Sears 172.103 and 172.104 integrate smart capabilities that allow for remote monitoring and control. Using a dedicated mobile app, users can adjust settings, receive notifications, and troubleshoot issues from anywhere, which adds a layer of convenience for busy households. This technology not only enhances user experience but also ensures that appliances operate at optimal levels, thus prolonging their lifespan.

The design of these models reflects a sleek and modern aesthetic, with intuitive controls that make operation straightforward for users of all ages. The ergonomic layout of buttons and digital displays ensures that users can easily navigate through various settings and options, reducing the learning curve typically associated with new appliances.

Both models come with a variety of features aimed at enhancing functionality. For instance, they offer customizable settings that can cater to specific cooking or cleaning preferences. This personalization aspect is a great benefit for families looking to streamline their routines while maximizing efficiency.

Durability is another key feature of the Sears 172.103 and 172.104. Constructed with high-quality materials, they are built to withstand daily wear and tear. This durability, combined with relatively low maintenance requirements, makes these models a cost-effective choice over the long term.

In summary, the Sears 172.103 and 172.104 models exemplify the ideal balance of modern technology, energy efficiency, user-friendliness, and durability. These appliances not only meet the practical needs of consumers but also incorporate advanced features that make them standout options in the competitive home appliance market. Their combination of efficiency and reliability positions them as solid investments for households looking to upgrade their home technology.
Top Page Image Contents