Accessories, Batteries | Sears 172.104, 172.103 specs

MAINTENANCE

TO RETIGHTEN A LOOSE CHUCK (Figs. 18 and 18a)

The chuck may become loose on the spindle and develop a wobble. Also, the chuck screw may become loose, causing the chuck jaws to bind and prevent them from closing.

To tighten:

1.Lock the trigger switch by placing the Forward / Reverse Selector Switch with Power Lock-Off in the center, or OFF position.

2.Open the chuck jaws.

3.Insert the hex key into the chuck and tighten the chuck jaws securely. Tap the hex key sharply with a mallet in a clockwise direction. This will tighten the chuck on the spindle.

4.Open the chuck jaws, and remove the hex key.

5.Tighten the chuck screw in a counter- clockwise direction.

Fig. 18

5 Companion

3 1

Fig. 18a

5 Companion

3 1

ACCESSORIES cont.

BATTERIES

The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries in this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. DO NOT disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

1.Remove the battery pack from the charger once it is fully charged and ready for use.

For battery storage longer than 30 days:

•Store the battery pack where the temperature is below 80°F

•Store battery packs in a “discharged” condition

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING

To preserve natural resources, please recycle or dispose of batteries properly.

This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash.

ACCESSORIES

!WARNING: The use of attachments or accessories that are not recommended for this tool might be dangerous and could result in serious injury.

Sears and other Craftsman® outlets offer a large selection of Craftsman and Companion drill/driver accessories designed for all your drill/driving applications.

Kits and sets specifically designed for drilling and driving. Twist drill bit sets, variety insert (screwdriver) bit sets, spade bit sets, carbide-tipped masonry drill bit sets, extra long bits, magnetic bit holders and more.

Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman for all of the accessories for your drill/driver.

Consult your local waste authority for information regarding available recycling and / or disposal options.

!WARNING: Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and / or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and / or serious injury.

N i - C d

10-4-07 Drill

10300-10400

172.104, 172.103 specifications

The Sears 172.103 and 172.104 are two notable models in the Sears line of home appliances, specifically designed to meet the needs of modern households while delivering reliability and efficiency. Both models are renowned for their robust construction, user-friendly interfaces, and a range of features that cater to the demands of everyday living.

One of the standout characteristics of the Sears 172.103 and 172.104 is their energy efficiency. These models comply with strict energy conservation standards, making them eco-friendly options for consumers looking to reduce their carbon footprint and energy bills. Both units are equipped with advanced energy management systems that intelligently monitor and adjust their power consumption based on usage patterns.

In terms of technology, the Sears 172.103 and 172.104 integrate smart capabilities that allow for remote monitoring and control. Using a dedicated mobile app, users can adjust settings, receive notifications, and troubleshoot issues from anywhere, which adds a layer of convenience for busy households. This technology not only enhances user experience but also ensures that appliances operate at optimal levels, thus prolonging their lifespan.

The design of these models reflects a sleek and modern aesthetic, with intuitive controls that make operation straightforward for users of all ages. The ergonomic layout of buttons and digital displays ensures that users can easily navigate through various settings and options, reducing the learning curve typically associated with new appliances.

Both models come with a variety of features aimed at enhancing functionality. For instance, they offer customizable settings that can cater to specific cooking or cleaning preferences. This personalization aspect is a great benefit for families looking to streamline their routines while maximizing efficiency.

Durability is another key feature of the Sears 172.103 and 172.104. Constructed with high-quality materials, they are built to withstand daily wear and tear. This durability, combined with relatively low maintenance requirements, makes these models a cost-effective choice over the long term.

In summary, the Sears 172.103 and 172.104 models exemplify the ideal balance of modern technology, energy efficiency, user-friendliness, and durability. These appliances not only meet the practical needs of consumers but also incorporate advanced features that make them standout options in the competitive home appliance market. Their combination of efficiency and reliability positions them as solid investments for households looking to upgrade their home technology.

Sears 172.104, 172.103 Accessories, To Retighten a Loose Chuck Figs and 18a, Batteries

Models: 172.104 172.103