OPERATION
CARPET PREPARATION
For best results prepare carpet for cleaning as follows:
1. Vacuum carpet 11oremove loose dirt before using Cleaner.
2. To remove stains and ground in dirt present in heavy traffic FILLER
areas of the carpet, spray or rub Sears Heavy Traffic Pro- OPENING Treatment (82833) into carpet before u_ing Cleaner. Follow
directions on the bottle.
FILLING CLEANER WITH WATER AND
CLEANING SOLUTION
See Figure 4
1, Open I'_ofthe1 Filler Opening,
2.Add Seam AH In One Carpet Cleaner (82813) solution or Sears Upholstery Cleaner (82843) solution to Solution Tank
| (depending on type of cleaning to be performed). Follow | i |
| Fig. 4 | |
| directions on label of bottle. | |
|
| |
3. | Pour clean, hot water (from tap) into Filler Opening in the |
|
| Solution Tank |
|
4. | Close Filler Opening. |
|
NOTE: This unit may become damaged if boiling water is used.
POWER CORO | AND SWITCH |
SeeFigure5 | SWITCH |
1. Plug Power Cord into electrical outlet.
2. Turn Power Switch to "ON* position.
POWER CORD
Fig. 5
SOLUTION
TANK
Continued-
