(Serf-Cleancontinued...)

WHEN A CLEAN CYCLE IS FINISHED:

1.Wall until the LOCK display goes out. The oven

temperature must drop to a safe level before the door can be unlocked.

WAIT UNTIL LOCK GOES OUT

AFTER A CLEAN

CYCLE

 

After a clean cycle, you may

 

notice some white ash In the

 

oven. Just wipe It up with a _j

J

damp cloth or sponge.

_Z>._.._

 

If white spots remain, remove them with a soap-filled steel

wool pad. Be sure to rinse thoroug hly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven Is not clean after one clean cycle, the cycle may be repeated.

TO INTERRUPT A CLEAN CYCLE:

1. Push CLEAR/OFF.

Follow Instructions under "WHEN A CLEAN

CYCLE IS FINISHED."

TO SET A DELAYED

SELF-CLEAN CYCLE:

You will not need to determine when the oven will turn on, when setting this function. The control will do this for you. You will need to set the amount of time you want your oven to clean (between 2 and 4 hours), and the time of day when you want the oven to turn off.

1.Press the CLEAN pad. The display will show "CLEAN", "TIME" and (---).

,Press either the UP or DOWN arrow pad to select the amount of time you want t he oven to clean. The normal cycle Is 3

hours but you may choose between 2 and 4 hours.

3.Press the STOP TIME pad.

4.Press either the UP or DOWN arrow pad to select the time of day you want the cycle to end and the oven to turn off.

Make sure your oven light is off during a self-clean cycle to prolong the life of the bulb.

QUESTIONS AND ANSWERS

Q. If my range control is not working, can I still self- clean my oven?

A. No. Your RANGE CONTROL Is used to program the oven to start and stop the self-cleaning cycle.

Q. Can I usa commercial oven cleaners on any part of my self-cleaning oven?

A.No cleaners or coatings should be used on or around any part of this oven.

Q.Can Iclean the woven gasket around the oven door?

A.You cannot clean the woven gasket.

Q.Is It normal to hear "crackling sound" during clean-

Ing?

A.Yes. This Is the metal heating and cooling.

Q.Why do I have ash left in my oven after cleaning?

A.Some types of soil will leave a deposit. It can be removed with a damp sponge or cloth.

O.What should I do if excessive smoking occurs during

cleaning?

A. This Is caused by excessive soil and you should press CLEAR/OFF. Open windows to rid room of smoke. Allow the oven to cool for at least one hour before opening the door. Wipe up excess soil and reset the clean cycle.

O.Should there be any odor during the cleaning?

A. Yes, there may be an odor during the first few cleanings. Failure to wipe out excessive soil might also cause an odor when cleaning.

16

NESCL61

Page 17
Image 17
Sears 36745, 36749 When a Clean Cycle is Finished, After a Clean Cycle, To Interrupt a Clean Cycle, Questions and Answers