Sears 385.1915 To Remove the Bobbin from the Machine, Horizontal Spool Pin Ordinary Spool

•To Remove the Bobbin from the Machine

J

(_) Remove the cover plate by (_)Takeoutthebobbin.

sliding the hook cover plate

release button to the right.

•Horizontal Spool Pin Ordinary Spool

	Spootstand.	_	r_	. _-Felt
		_	_'_	Additional
Small Spool	Hole		_	spoolpin

Lift up the spool pin, Place the spool of thread on the spool pin with the thread coming off the spool as shown.

Attach the large spool holder pressing it firmly against the thread spool.

*"Fne small spool holder is used with narrow or small thread spoos.

The additional spool pin is used to wind

extra bobbin without unthreading the machine or twin needle sewing (see page 80). To use, insert the spool stand and an additional spool pin in the hole.

Piece the felt and spool on the pin with the thread coming off the spool as shown.

18