Sears 385.1915 owner manual Put in a Zipper

:Put in a Zipper (Continued)

C

Zipper teeth

(t/8")

C, Sew In the zipper.

!. FoJd back the left seam allowance as shown.

2.Turn under ,the right seam allowance to form a 1/8" _old.

3.Place the zipper teeth next to the 1/8"" fold and pmm place.

4, Attach the foot holder to the right pins on the zipper foot.

5.Lower the zipper foot on the top side at the bottom of the zipper so that the needle pierces the fold and the zipper tape.

6, Sew through the fold and the zipper tape to the point where the slider begins.

8.Open the zipper.

9, Lower the presser foot and stitch the rest of the seam.

7. Lower the needle to hold the fabric and

NOTE: Be sure the top of the zipper (theraise the presser foot, slider) is at the top of the garment.

37