Sears 385.1915 owner manual Set Up the Machine, Plug in the Machine and Switch on the Power

Set Up the Machine

e Plug in the Machine and Switch on the Power

(_ Power supply

Power

ACHINEF(

[ 0-4 Foot ^)

switch

supply

ppfy

cord

Machine sockets

Machine plug

I_) Foot control plug

Foot control

Before connecting the power cord, make sure the voltage and frequency shown on the machine conform to your electrica_ power.

Turn off the power switch, and insert the foot control plug (_ machine plug (_ and power supply plug (_) in thts order.

For Your Safetv

1.While in operatLon, always keep your eye on the sewing area, and do not touch any moving parts such as the thread take-up lever, balance wheel or needle.

2, Always turn off the power switch, and unplug from the power supply:

•When leaving the machine unattended. When attaching or removing parts.

• When cleaningthe machine.

3.Do not place anything on the foot control, except in use.

Power switch

f,

Sewing light

When the power switch is turned on, the straight stitch is set on liquid crystal display automatically.

Store the power supply cord

L 15cm_ 16cm =iI

Power supply cord can be stored in extension table as shown,