i¸¸ii i!ii!!i¸iiiiii ii i!ii i!il =
_EFo1R SE
Pick Up Your Bobbin Thread
\
| Raise | presser | foot | lever, | Hold | 2, | Bring bobbin thread up by pulling | 3, | Pull | both | threads under | and to the | |||
® | needle | thread | loosely | in left | hand |
| top thread. |
| back | of | the | presser | foot, | leaving 3 | |
and | rotate handwhee! | toward | you |
|
|
| to 4 | inches | of thread | clear, | |||||
| one | compJete | turn, |
|
|
|
|
|
|
|
|
|
|
| |
5, Draw thread down and Into th read gu ida.
6.Pull the thread to the left and slip _t through the thread guide,
7.Thread then is slipped into needle bar thread guide.
8.Thread needle from front to back.
NOTE: You may want to cut the end of the thread with sharp scissors for eas_er needle threading.
If you cannot pick up bobbin thread by following steps gtven above, then check:
1.Is needle threaded from front to back?
2.Is thread tangled around needle?
3.Are 3 to 4 inches of thread coming from the bobbin?
4, Is thread from bobbin tangled?
5.Is bobbin property installed in the bobbin case?
6.Is the machine threaded according to the instructions?
17
