Sew in a Zipper:
Set the Machme
St=tch selector
ot openmg
|
| Stitch | length |
|
|
|
Top | thread | tenstot_ | 12 |
|
|
|
control | 3 | tO 6 |
| Top | edge of | fabric |
|
|
|
| |||
|
|
| Fabric | Preparation: |
|
|
|
|
| Put the top sides of the fabric together | |||
|
|
| and sew to the end of the zipper | |||
|
|
| opemng, | Use the | reverse | to iock the |
|
|
| stitches. |
|
|
|
Sew the zipper opening wroth stitch length at "6" and top thread tension at "3",
Zipper tape
To Sew:
1.Fold back the left seam allowance as shown.
2, Turn under the r_ght seam allow- ance to form a 1/8" fold,
3.Place the z_pper teeth next to the 1/8" fotd and pin m place,
4.To sew the left side of the ztpper, set the zipper foot on the left side of the needle.
5, Lower the zipper foot on the right s_de at the bottom of the zipper so that the needle pierces the fold and the zipper tape.
6.Sew through the fold and the zip- per tape to the point where the slider begins,
7, Lower the needle to hold the fab- ric and raise the presser foot.
41
