Prepare Your Top Thread
€ThreadYour Needle
@The numbered steps below follow the numbers on the illustrations.
Dotted lines show places where the thread loops and then is pulled
tight,
Raise thread take-up lever to its highest position by turning
hand wheel toward you. Raise presser foot _ever, Place spool
on spool pin as shown, with thread coming from the back of
the spool.
2, While holding thread near
spool, draw thread into
threading channel toward
you making sure the thread
_spulled firmly between the
tensiondiscs,
3, Draw thread down channel
and around the spr=ng wlra
as shown.
4. Draw thread up & through
take-up lever.
16