SECTION3. LEARNTHE STITCHES
8. | Open | the | zipper. | 10. Close | the | zipper | and turn | the |
9. | Lower | the | presser foot and stitch | fabric | right | side up. |
|
|
| the rest of the seam. |
|
|
|
|
| ||
INVISIBLE ZIPPER AND CORDrNG
INVISIBLE ZIPPER
Adjust the foot so the needle is sewing through the center hore of the foot and one groove of the foot is riding on the teeth of the zipper as
shown. Follow the zipper manufacturer's inst- ructions. After zipper has been inserted, finish sewing seam by shifting foot to side position sewing through side notch,
CORDrNG
Foot can also be used to make cording for slip- covers etc. Cover a cord with a strip of bias fabric and sew as shown.
NOTE:
Use "Low Bar Sewing Machine ZIPPER FOOT'"
(6757) for "invis}ble zipper" and "cording", which can be obtained at any Sears retail store.
11.To sew the right side of the zip- per, set the zipper foot on the right side of the needle.
12.Stitch across and below the bot- tom of the zipper.
13.Turn the corner and continue to guide the foot along the zipper teeth, as shown.
Stitch through the fabric and zipper tape.
Right side
f
/
14.Stop about 2" from the top of the zipper.
15.Lower the needle into the fabric and raise the presser foot.
16.Remove the basting stitches and open the zipper.
17.Lower the foot and stitch the rest of the seam. Make sure the fold is even.
21
