![](/images/new-backgrounds/1010565/1056581x1.webp)
SECTION 5. CARE FOR THE MACHINE
Oiling the Machine
Oil the machine in all areas shown on this page at least once a year; otherwise the machine can become sluggish or will knock loudly. frequently, oil the machine under the top cover about every three months. In case machine is not used for an extended time, oil it before sewing machine oil. One or two drops of oil is sufficient. Remove excess oil, otherwise it may stain fabric.
If you use the machine sewing. Use good quality
Kenmore sewing machine oil is available at your nearest Sears retail store.
NOTE: Unplug the machine before oiling. Remove needle and put needle bar in full down position.
e Oil behind the Face Cover Plate and under | the Arm Cover | Plate | • Oil the Underside |
_ | cover | plate |
|
Facecover plate | I |
|
|
|
|
|
Shuttle cover
Open face cover plate and/or remove arm cover plate by loosening top screw to oil points | Open the shuttle cover by pulling down the embossed part on |
in illustration. | the left side of the cover. Tilt the machine head back and |
| |
Use only a drop of oil; do not | remove bottom cover. Oil points in illustration. |
|
40