Krell Industries KRC-3 manual Amplifier Functions, Battery Installation

AMPLIFIER FUNCTIONS

Turns KRELLAudio Standard or S-Series amplifiers On or Off.

MTRTurns KRELLS-Series amplifiers bias level meters On or

Off and cycles through KRELL Audio Standard meter functions.

NOTE: The B2 and GAIN buttons are not functional with the KRC-3.

BATTERY INSTALLATION

NOTE: Batteries (AAA) should be replaced when the KRC-3 does not readily respond to remote commands.

1.Remove the four torx screws from the remote control's back plate.

2.Remove the back plate to expose the battery storage compartment.

3.Insert batteries (refer to the polarity drawing while inserting batteries.)

4.Replace the back plate and insert the four torx screws.

9