REMOVABLE OVEN RACKS
Be careful not to scratch the oven finish when installing or removing oven racks.
To install:
1.Set the raised back edge of the rack on a pair of rack guides.
2.Push the rack In until you reach the bump In the rack guide, then lift the front of the rack and push the rack all the way In.
To remove:
1. Pull the oven rack out, then up.
Some models have one standard oven rack and one folding oven rack.
The folding rack can be easily stored away when not In
use.
NOTE: For best performance, remove oven racks during a clean cycle. If oven racks are left in the range during a
apply a small amount of vegetable oil to the rack
edges after the
m
BUMP
IN RACK
GUIDE
REMOVABLE OVEN DOOR
TO remove:
1.Open the door to the stop position (see illustration).
2.Grasp the door at each side and lift up and off the hinges.
NOTE: When the door is removed and hinge arms are at stop position, do not bump or try to remove the hinge arms. The hinges could snap back causing an injury to the hands or damage to the porcelain on the front of the range. Cover the hinges with
toweling or empty towel rolls while working in the oven area.
To replace:
1.Hold the door over the hinges with the slots at the bottom edge of the door lined up with the hinges. The hinge arms must still be in the stop position.
2.Slide the door down onto the hinges as far as It will go and close the door.
STOP (BROIL) POSITION
HINGE
REMOVABLE STORAGE | DRAWER |
|
| |||
This drawer gives | you | space | for keeping cook- |
|
| |
ware and bakeware. |
| Plastics | and flammable | __f_ | GUIDE STOP | |
material should not | be | kept in | this drawer. | |||
|
| |||||
Do not overload the storage drawer. If the drawer is too heavy, it may slip off t he t rack when opened. To open the drawer, grasp the center of the handle and pull straight out.
To remove:
To replace:
Pull drawer straight out and lift over the guide stops.
Lift over the guide stops and slide drawer into place.
16 | NCMNT01 |
