Sears 790.93754, 790.93752 manual Oven Control Functions, For a silent control panel, conversion

Oven Control Functions

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions of the oven as described below.

OFF/CANCEL PAD--Used to clear any function previously entered except the time of day and minute timer. Push OFF/CANCEL to

stop cooking. Also the OFF/CANCEL pad is used to activate oven door lockout setting•

BAKE PAD--Used to

select the bake ._ function.

BROIL PAD--

Used to select the variable broil function.

CLEAN PAD--Used to select the self-cIeaning cycle.

UP and DOWN ARROW PADS--Used aIong with the function pads to select oven temperature, cook time, stop time (when programming an automatic stop time), time of day, clean time and minute timer.

O _H_T

CLOCK SET PAD-- Used to set the time of

day.

FEATURE INDICATOR

LIGHTS-- These light to show which feature

IS In use.

COOK TIME PAD-- Used to enter the length of the baking time (if equipped).

STOP TIME PAD-- Used

to set the desired stop

time for baking• Can be used with COOK TIME to

program a delayed bake cycle (if equipped).

/

OVEN, PREHEAT & DOOR LOCKED LIGHTS -- The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature• The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the self-clean cycle or the oven door lockout mode is activated• The indicator light will glow constantly after the door locks•

TIMER ON/OFF PAD--Used to set or cancel the minute timer. The minute

timer does not start or stop cooking• Also,

TIMER ON/OFF pad is used to set the Continuous Bake feature.

The oven can be programmed to: BAKE, TIME BAKE, BROIL, SELF-CLEAN, CONTINUOUS BAKE and set for OVEN LOCKOUT.

For a silent control panel

When choosing a function, a beep will be heard each time a pad is pressed. If desired, the controls can be programmed for

silent	operation. Press and hold _.		After	7 seconds, the control	will beep once. This will block the controls from sounding
when	a pad	is pressed. To return the sound,		press and hold _	again for 7 seconds until the control beeps once.
Note: The control will return to the audible mode after a power outage.
Temperature		conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (65°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1. Press _. "----" appears in the display.

2.Press and hold the A until "HI" appears in the display.

3.Press and hold Q until °F or °C appears in the display.

4.Press the _. or v to change °F to°Cor°Cto°F.

5.Press any control pad to return to normal operating mode.

9