ASSEMBLY
•Assembly requires two persons.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps.
•To identify small parts, see page 5.
•In addition to the included tool(s), assembly requires the following tools:
one Phillips screwdriver
Assembly may be easier if you have your own set of wrenches. To avoid damaging parts, do not use power tools.
1.While a second person lifts the rear of the Frame (1), attach the Rear Stabilizer (70) to the Frame with two M10 x 85mm Screws (82).
1
70
1
82
2. Orient the Front Stabilizer (73) as indicated by | 2 |
|
the sticker. |
| |
|
| |
While a second person lifts the front of the | 73 | 82 |
Frame (1), attach the Front Stabilizer (73) to the |
|
|
Frame with two M10 x 85mm Screws (82). |
|
|
1
6
