3. Orient the Upright (2) and the Shield Cover (37)
as shown. Slide the Shield Cover upward onto the Upright.
3
Wire Tie
Have a second person hold the Upright (2) and the Shield Cover (37) near the Frame (1).
Locate the wire tie in the lower end of the Upright
(2). Tie the wire tie to the Main Wire (42). Then, pull the upper end of the wire tie until the Main Wire is routed through the Upright.
Tip: To prevent the Main Wire (42) from fall- ing into the Upright (2), secure the Main Wire with the wire tie.
2 
37
Wire Tie 
42 1
7
