ASSEMBLY
For your convenience, the ARC SKIER PLUS isshipped assembled in the stowaway position. Follow the instruc-
tionsbelow to set upthe ARC SKIER PLUS. No tools are required.
1. Raisethe Upright (26) to the position shown. Slide
the M10 Washer (18) onto the Lock Knob (30). Insert
the Lock Knob into the indicated bracket and tighten
the LockKnob Intothe lower end ofthe UpdghL
2. The Console (27) requirestwo "AA"batteries (not
included).Alkaline batteries are recommended.
To install batteries, first slide up the BatteryCover
(46). Carefully removethe battery clip from the
Console (27). Insert two batteries intothe battery
clip. Make sure that the negative (-) ends of the
batteries are touching the springs. Insert the bat-
tery clip into the Consoleand closethe Battery
Cover.
3. Before usingthe cross-country skier, the included all-
iconoil should be applied. Apply a few drops of sili-
conall to the Ski Rails (1) where the Ski Pedal
Wheels (23) make contact.
3O
Battery Clip
1---Apply Silicon Oil
Make sure that all pads are securely tightened. The use of the remaining parts willbe explained inthe following
section.
4