ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing matedals untilassembly is completed.
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: The Included 7/32" allen wrench
and your own adjustable wrench _:;;;:=:::::::_.
1. Insert the square end of one of the Upright Bushings (98) into
the square hole in the right side of the treadmill Frame (45).
Insertthe other Upright Bushing into the hole inthe left side of
thetreadmill Frame (not shown).
98
45
2. With the help of a second person, raise the Right Upright (18)
and the Left Updght (not shown) to avertical position. Align the
holein the lower end of the Right Updght with the hole in the
sideof the Frame (45). Insert an UprightBolt (22), witha Flat
Washer (15), into the Right Upright, and tighten the Boltinto the
Frame. Tighten the Boltthat is already in the Right Upright.
Attach the Left Upright (not shown) inthe same manner.
15
45
22
3. W'dhthe help of a second person, raise the Left and Right
Handrails (7, 14) as shown. Insert a Handrail Bolt (1) into each
• ofthe Uprights (3, 18), and tightenthe Bolts withthe 7/32" Allen
Wrench (71).
3
4. Remove the paper backing from the Wrench Clip (62). Press the
Wrench Clip onto the Frame (45) in the indicated location. Press
the3/16" Allen Wrench (61) into the Wrench Clip.
Make sure that all parts are tightened before using the treadmill.
Note: Cover the floor underneath the treadmill for protection.
61
62
6