OPERATIONAND ADJUSTMEN]
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to;the ,walking belt or the wa!king plat-
form. Such substances will deteriorate the walking
belt and cause excessive'wear.
THE PERFORMANT LUBETM WALKING BELT This product is t;oruse on a nominal 120-volt circuit,
and has a grounding p!ug that looks like the plug illus-
Your treadmill features awalking beltc0ate d with. _'- "_.trate'a i_'idrawing i below. A ternporaryadapter that
lookslike the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown indrawing 2 if a propedy
grounded outlet is not available.
HOW TO PLUG;IN3"HEPOWER CORD
Your treadmill, likeany othertype ofsophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power.
Voltage surges, spikes, and noise interference can
resultfrom weather conditions or from other appliances
being turned on or off. To decrease the possibility of
your treadmill being damaged, always use a surge
suppressor with your treadmill (see d_-awing 1 at
the right).
1
• _Grounded Outlet Box
_'-1 .__ SurgeSuppressor
.1[ _ r'_l '_.:l_,j Grounding Pin
Grounding Plug
Grounded Outlet Box
•Adapter A
_ Surge _uppressor
Metal screw _
Surge suppressors are sold at most hardware stores
and department stores. Use only asingle-outlet surge
suppressor that is UL 1449 listed as a transient voltage
surgesuppressor (TVSS). The surge SUl_pressormust
have a UL suppressed voltage rating of 400 vo!ts or
less and a minimum surge dissipation of 450 joules.
The surge suppressor must be ele_ficaily rated for
120 volts AC and 15 amps.
This product must be grounded. Ifit should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec-
tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord intoa surge suppressor,
and ptugthe surge suppressor into an appropriate
outlet thatis properly installed and grounded-in
accordance with all local codes and ordinances.
The temporary adapter should be used only untila
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
groundsuch as a propedy grounded outlet box'cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact aqualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.