Sears L0711256 Mate TM, Snaps into place, Turn wand button, To remove Disconnect cord and step on

Before assembling your vacuum cleaner, be sure you have all parts shown in PARTS AND FEATURES.

WARNING

Electrical Shock Hazard

DO NOT plug into electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury.

Slide wands

w,together until.osBu wand button

snaps into place, Turn wand button

to the slotted

area of the wand swivel.

The	swivel	allows	Swivel --
you	to turn	the	CordWand
handle to the left
			Holder
side to reach far-
ther	under	low
furniture.

POWER.MATE TM

1. Insert wands into POWER-MATETM until the wand buttons snaps into place.

2. Connect

POWER-MATE TM plug and cord as shown. DO NOT force. Raised area

of plug must be toward hand.

3. Secure cord into cord holder on wand swivel.

To remove: Disconnect cord and step on

wand release pedal, then pull up on wands.

Handle -_J_'_

Wand

Swivel

POWER-Wand

MATE TM

Wand

Bu_on

__ Release Pedal

6