Sears L0711256 Open the canister hood, Into, Wand until, Snaps, Place. Be, Sure hose, To remove

CANISTER

1.Open the canister hood.

2.Check to see that the dust bag is proper- ly installed. See BAG CHANGING for instructions.

3.Check to see that the motor safety filter is properly installed. See MOTOR SAFETY FILTER CLEANING for instructions.

HOOD

It is normal for the canister hood to come off when opened further than needed. Line up the hinges, insert them, and close the hood to replace it.

HOSE

	2. Insert
	handle	into
	wand until
	lock button
	snaps in
	place. Be
	sure hose
Handle	is not
	twisted.
Handle	To remove:
Qu_k	press han-
Re_ase
	dle release
_ome
	button	and
	pull up	on
	handle.

To store: Disconnect hose from wands and

1.Line up the hose latch tab and notch in canister hood and insert hose into canister until it snaps in place.

To remove: lift

hose latch tab

upward and pull

up on hose.

J

Hoodand_'_,,_

Attachment

Performance

Indicator

(Some Models)

canister to prevent stress on hose during storage, Store hose in a loosely coiled

position so the hose covering is not stressed.

Canister

CoverPerformance

IndlcetorLIght

(Some Models)

- DustBag

7