10.Attach the Backrest (13) to the Seat Carriage (11) with five M8 x 16mm Screws (60) and five M8 Split Washers (61).
Tip: It may be helpful to adjust the seat dur- ing this step. See HOW TO ADJUST THE SEAT on page 13.
11.Identify and orient the Pulse Bar (12) so that the Pulse Grips (41) face upward.
Tip: Avoid pinching the Pulse Bar Pulse Wire (72). While a second person holds the Pulse Bar (12), attach the Pulse Bar to the Seat Carriage (11) with two M8 x 45mm Screws (63) and two M8 Split Washers (61).
Tip: It may be helpful to adjust the seat dur- ing this step. See HOW TO ADJUST THE SEAT on page 13.
10 |
13 |
11 |
61 |
60 |
11 |
Avoid pinching
the Pulse Bar
Pulse Wire (72)
41
11
12
41
61
63 
72 
10
