3.Slide the Shield Cover (5) upward onto the Upright (4).
Have a second person hold the Shield Cover (5) around the Upright (4) until you complete step 4.
Tip: Avoid pinching the wires inside the Frame (1). Slide the Upright (4) onto the Frame.
Attach the Upright (4) with five M8 x 16mm Screws (60) and five M8 Split Washers (61).
4.Locate the wire tie inside the Upright (4). Then, locate the Main Wire (76) and the Frame Pulse Wire (75) inside the Frame (1).
Tie the lower end of the wire tie to the ends of the Main Wire (76) and the Frame Pulse Wire (75).
Then, pull the other end of the wire tie upward until the Main Wire (76) and the Frame Pulse Wire (75) are routed through the Upright (4).
Then, slide the Shield Cover (5) downward and press it onto the Right and Left Front Shields (21, 22).
3 |
|
| |
| 5 | Avoid pinching | |
| the wires | ||
|
| 4 | |
|
| 61 | |
60 | 61 | 60 | |
1 | |||
| 61 | ||
| 60 |
| |
4 |
|
|
Wire Tie
5
Wire
Tie 75
4 | 76 |
| 1 |
22
21
7