Sebo G-SERIES Clogs in the Airflow Pathway - Figure, Clogs in the Attachment Hose - Figure, Page

Models: G-SERIES

1 14
Download 14 pages 3.9 Kb
Page 9
Image 9
Clog Removal

39

Figure 13

12

24

4

Figure 14

12

11

27

15

Figure 15

Clog Removal

Always unplug vacuum from outlet before removing ! any clogs!

Clogs in the Airflow Pathway - Figure 13

Most clogs can be removed by accessing the airflow pathway via the orange colored access door (39) located on the underside of the power head. However, other clogs may only be removed by accessing the airflow pathway by disassembling the machine in the opposite sequence of the machine’s original assembly (see assembly, page 5).

Clogs in the Attachment Hose - Figure 14

Blockages in the hose can be cleared by removing the attachment hose (12) from the machine by squeezing the retaining ring (4) and inserting the oppo- site end of the hose in the connecting tube (24). Hold the hose upright with one hand blocking the top end and switch on the machine. If necessary, quickly lift your hand on and off the end of the hose. If this procedure does not clear the clog, a straight wire can be inserted into the hose to push out the clog. Take care not to puncture the hose with the wire.

Clogs in the Attachment Tube (Active Wand) - Figure 15

Remove attachment hose (12) from the attachment tube (15) by pressing the hose release button (27). Then, grip attachment tube handle (11) and remove tube from the machine. A straight wire can be inserted into the tube to push out the clog.

7

40

Figure 16

Clogs in Entrance to Dust Bag - Figure 16

Remove attachment hose (12) from vacuum cleaner (see figure 14) and remove front cover (7). Clean out connecting tube (24) and/or entrance to bag (40).

8

 

 

 

 

6

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

 

Figure 17

Clogs in the Swivel Neck - Figure 17

Clogs in the swivel neck (20) can be removed by first pressing the housing release button (8) and lifting off the dust bag housing (6). Lift upward firmly and evenly to properly remove the dust bag housing. Then, release the foot pedal (19), lower the swivel neck, check inside the swivel neck channel clos- est to the foot pedal (see arrow), and clean out pathway.

Page 9

Page 9
Image 9
Sebo G-SERIES manual Clogs in the Airflow Pathway - Figure, Clogs in the Attachment Hose - Figure, Clog Removal, Page