SECO-LARM USA SA-025EQ manual Relock Modes, Standard Mode Default, BOCA Mode, Timed Mode

ENFORCER Delayed Egress Timer

IMPORTANT

Users and installers of this product are responsible for ensuring that the installation and configuration of this product complies with all national, state, and local laws and codes related to locking and egress devices. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or codes.

Relock Modes:

The SA-025EQ can operate in three different relock modes: standard mode, BOCA mode, and timed mode. In order to switch between these modes, locate the relock mode jumper on the circuit board and move the jumper to the appropriate pins.

Standard mode BOCA mode

Relock mode jumper

Timed mode

Standard Mode (Default)

Once the lock has been released, it will remain released until manually relocked by a reset device connected to the Reset Input. For information on connecting a reset device, see pg. 4, Wiring Diagram. This reset device is often a momentary spring-loaded key switch.

BOCA Mode

This mode is for use with BOCA (Building Officials Code Administrators) regulations.

Once the lock is released, the door will remain unlocked until the door is closed. Once closed, the door will still remain unlocked for 30 seconds. If the door is opened at any time during the 30 seconds, the timer will reset. The 30-second timer will restart once the door is closed.

NOTE: The lock status jumper (see pg. 7) must be ON with a door-mounted N.C. magnetic contact connected to the lock status input terminal for the BOCA mode to operate correctly.

Timed Mode

Once the lock is released, it will remain released for the duration of the set post-delay timer.

To set the post-delay timer see pg. 6, Adjusting the Pre-Delay and Post-Delay.

SECO-LARM U.S.A., Inc 5