6. ASSEMBLING AND INSTALLATION
|
| ● Perform assembly work by following the procedure herein stated. Failing to com- |
WARNING! | ply with the instructions can cause electric shock hazard. | |
● Perform assembling as per this manual. Since this is a complex machine, errone- | ||
|
| ous assembling can cause an electric shock, machine damage and or not function- |
|
| ing as per specified performance. |
|
| ● When assembling, be sure to use plural persons. Depending on the assembly |
|
| work, there are some cases in which working by one person alone can cause per- |
|
| sonal injury or parts damage. |
|
| ● Ensure that connectors are accurately connected. Incomplete connections can |
|
| cause electric shock hazard. |
|
| ● This work should be performed by maintenance or service personnel. Attempts |
|
| to perform this work by unqualified personnel could result in electrical shock or |
|
| other serious accidents. Furthermore, work not performed according to the in- |
|
| structions in this Owner's Manual could result in electrical shock to customers or |
|
| other serious accidents. If no qualified personnel are available, please contact the |
|
| dealer from which this product was purchased or the office shown on this Owner's |
|
| Manual to request service. This is to ensure safety. |
|
| ● Be careful not to damage the wiring. Damage to wiring could cause electrical |
|
| shock or shorting. |
|
| ● Do not expose power cables, earth wires, or fiber optic cables in passageways, etc. |
|
| Exposure could lead to damage, possibly causing electrical shock or shorting. Be |
|
| sure to use protective cable covers if cables must be laid on floors. (Cable diam- |
|
| eters: Approx. 1/8” for power cables, Approx.1/5” for optic fiber cables. |
|
|
|
|
|
|
|
| ● In order to ensure safe and reliable work, be sure to provide a stable step or step- |
ladder. Performing work without a step or stepladder can lead to slips and falls.
CAUTION! | ● | Work should be performed in a flat area measuring at least 12 ft square. Accidents |
| ||
|
| may occur in a workspace that is smaller than this requirement, or that is on an |
incline, is uneven, or has channels in the floor. The work itself will also be more difficult to perform if this requirement is compromised.
feet 12
12 feet
www.seuservice.com | 14 |