
7. PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE
| ● When moving the machine, be sure to pull out the plug from the power supply. | ||
WARNING! |
| Moving the machine with the plug as is inserted can cause the power cord to be | |
| damaged, resulting in a fire and or electric shock. | ||
|
| ||
| ● When moving the machine on the floor, retract the Adjusters and ensure that Cast- | ||
|
| ers make contact with the floor. During transportation, pay careful attention so that | |
|
| Casters do not tread power cords and earth wires. Damaging the power cords can | |
|
| cause an electric shock and/or short circuit. | |
| ● When lifting the cabinet, be sure to hold the catch portions or bottom part. Lifting | ||
|
| the cabinet by holding other portions can damage parts and installation portions due | |
|
| to the empty weight of the cabinet, and cause personal injury. | |
|
| ||
|
| ||
| ● Do not use a forklift to move this product. This could cause breakage of compo- | ||
CAUTION! |
| nents, and the pieces could cause injury. | |
● | Do not push on glass or molded parts. This could cause breakage of components, | ||
| |||
|
| and the pieces could cause injury. | |
| ● Do not move the stations by pulling or pushing on the armrests. This could cause | ||
|
| breakage, and workers could suffer injury from the pieces. | |
|
|
|
STOP
IMPORTANT!
●When transporting the product in places with steps, disassemble into each unit be- fore transporting. Inclining the product in an as is assembled condition or placing the cabinet in places with steps can damage the unit's joining portions.
●To protect surface, do not directly apply a rope to the surfaces of product. Use pro- tective materials to the places the rope is applied to.
On level surfaces, move the machine by causing the casters to make contact with the surface.
***Note: Image Differs From Actual Unit.
FIG. 7 a Casters of the main projection unit
www.seuservice.com | 26 |