Station Portal

Run the fiber optic cable from the Left station of the Right Station Set through the Station Portal into the Right station of the Left Station set. Then plug the fiber optic cable into the proper port on the Naomi Filter Board.

(6) Pem Studs

Secure the (6) Pem Studs between the Left Station Set and the

Right Station Set. There are 3 in the front and 3 in the rear of the

Station Sets.

Place on the Unit the (3) brackets to the front and sides of the Station Sets. The front bracket takes Phillips screws where as the side brackets take tamper proof screws.

Front Center

Left and Right Sides

www.seuservice.com

20