9. COIN SELECTOR
WARNING!
STOP
IMPORTANT!
Be sure to perform this operation with the power switched off. Failure to do so could cause electrical shock or shorting.
●Use a soft cloth to clean the coin selector. When especially dirty, wipe it with a cloth that has been dampened with either hot or cold water. Never use chemical cleansers or solvents.
●When the coin selector has been removed, be sure to confirm that it works correctly after replacing it.
●The coin selector is a piece of precision equipment. Careless handling can cause breakage of components, poor connections in the electronic circuitry, etc.
9 - 1 REMOVING THE SELECTOR
1Turn off the power.
2Release and open the service door.
3 Flip the two spring loaded catches and remove the |
| Release |
selector up and out sideways from the bracket. | FIG. 9. 1 | |
| ||
Catches
PHOTO 9.1 a
www.seuservice.com | 34 |