English
●Before starting a dive, be sure to check that the hands for diving measurement are reset to “0” position. If not, reset them following the procedure in “ADJUSTING THE HAND POSITION BEFORE DIVING”.
●When you ascend to a depth less than 1.6 m underwater and the watch stops measuring the depth, the DEPTH and 1/10 m hands indicate “0.0 m”.
●If you descend again to a depth of 1.6 m or more underwater before 10 minutes have elapsed, the time elapsed after the depth measurement is stopped is added to the measured diving time.
●For 10 minutes after a dive, all the three buttons will not work.
●After 10 minutes have elapsed following a dive, recall of log data is made possible by pressing button B.
WARNING FUNCTION FOR DIVING
RAPID ASCENT WARNING
●The watch monitors the change of depth at 10 second intervals and gives a warning if the diver ascends more than 3 m in 10 seconds, that is, at a rate of more than 18 m per minute.
Warning sound beeps intermittently for about 10 seconds and 1/10 m hand moves back and forth.
Beep Beep
14
