Seiko 9S519S559S56 manual The time setting procedure has been completed

6

6

6

3 Push the crown back into the unscrewed position in accordance with a time signal for "00" seconds. Adjustments of the 24-hour, minute and second hands have been completed.

4 Then, pull out the crown to the first click and turn it to set the hour hand to the time in Japan.

■ The date can be adjusted at this step.（To set the date, refer to P.20 ～21.）

※Check that AM/PM is correctly set by turning the hour hand past the 12 o'clock marker. If the date changes to the next date, the time is set for the AM period.（ie : 12 o'clock=midnight.） If the date does not change, the time is set 15 for the PM period.（ie : 12 o'clock=noon.）

※When setting the hour hand, other hands may move slightly. However, this is not a malfunction.

6

5 After setting the hour hand, push back the crown in to the normal position.

The time setting procedure has been completed.

The 24-hour hand shows the time of an area in a different time zone, while the current time in the place you are is shown by the hour hand independently of the 24-hour hand.To set the 24-hour hand to the time of another area in a different time zone, repeat the steps from 1.