FARGO electronic HDPii manual Step Procedure

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Print Both Sides - Split 1 Set of Ribbon Panels option

Use this option to provide the most economical means of printing a dual-sided card since a single set of Ribbon Panels will be split to print both the front and backside of a card.

•This option becomes active when Print Both Sides is checked.

•The Default is active and unchecked except for YMCKK, which is checked.

Step Procedure

1Select this option to automatically print full-color on the front of a card and resin black on the back of a card (using YMCKK Print Ribbons).

•If using a YMCKK Ribbon, the front of the card is printed with the YMCK Panels and the back is printed with the second K Panel.

(Note #1: This option is automatically enabled when a YMCKK Ribbon type is selected.)

(Note #2: This option is not available if using a YMCKH Ribbon.)

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 7-32