FARGO electronic HDPii manual Selecting the Clean Printer tab

RESTRICTED USE ONLY Fargo Electronics, Inc.

Selecting the Clean Printer tab

The button for the Clean Printer tab is described below.

•Clean Button: Launches cleaning routine. Follow the instruction on the page for setting up the Printer.

•Help button: Launches help that is specific to this tab.

Step	Procedure
1	Click the Clean Printer tab. See the next page.
	a.	Remove the Card Cartridges and close the covers.
	b.	Remove the paper back from both sides of the Cleaning Card. (Note:
		DO NOT remove the left liner if a Magnetic Encoding Module is installed
		in your printer.)
	c.	Insert the Cleaning Card into the Card Hopper’s Infeed Rollers.
	d.	Click on the Clean button below.
	e.	Guide the Cleaning Card into the Printer if necessary.
	f.	When the Cleaning routine is complete, the Cleaning Card will exit the
		Printer via the Card Hopper Infeed Rollers.
	g.	Reinstall the Card Cartridges.
	The Cleaning routine will begin after all current print jobs have completed.
		Continued on the next page

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 9-23