FARGO electronic HDPii manual Newname, Ipaddress

RESTRICTED USE ONLYFargo Electronics, Inc.

Reviewing the Telnet Command Table (continued)

Telnet Command			Command Purpose	Command Format
set	sysinfo	contact	Set the contact string.	set sysinfo contact [<STRING>]
		location	Set the location string.	set sysinfo location [<STRING>]
		label	Set the label string.	set sysinfo label [<STRING>]
		from	Set all strings from	set sysinfo from defaultcurrent
			default or current
			settings.
	syslog	name	Change the name of a	set syslog <LOG_NAME> name
			system log path	<NEW_NAME>
		type	Change the type of a	set syslog <LOG_NAME> type
			system log path. This	[[-]job] [[-]pfault]
			starts or stops logging
			on start of jobs or on
			faults.
		dest	Change the destination	set syslog <LOG_NAME> dest
			of a system log path.	noneemailudptcp
			This may be set to
			none, e-mail, udp or
			tcp.
		email	Change the e-mail	set syslog <LOG_NAME> email
			address for e-mail	<EMAIL>
			notification for a
			system log path. It
			must specify a valid e-
			mail address.
		udp	Specify the IP address	set syslog <LOG_NAME> udp
			of the UPD system	<IPADDRESS>
			logging program.
		from	Restore system log	set syslog from defaultcurrent
			path settings from the
			default or current
			settings.

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 6-9