FARGO electronic HDPii manual Reviewing Frequently-asked Questions Answer

RESTRICTED USE ONLYFargo Electronics, Inc.

Reviewing Frequently-asked Questions (continued)

Question		Answer
How do I upgrade the	Follow this procedure.
Printer Firmware in my	1.	Run the Fargo Workbench Printer Utility from the start
Ethernet-enabled Printer?
		menu: Go to the Start -> Programs -> Fargo -> Fargo
		Workbench Printer Utility -> Fargo Workbench.
	2.	Select the Fargo Printer to upgrade from the drop-down
		box.
	3.	Go to the Firmware Updates tab.
	4.	If you need to download the update file from the Internet,
		select the Download Firmware button.
	5.	Choose the update file with the Select Firmware button.
	6.	Put your Printer into the upgrade mode. See the
		instructions for your specific Fargo Printer.
	7.	Select the Send Firmware button.
How do I upgrade the Print	Since the Print Server is integrated into the main print
Server Firmware for my	Firmware on the Printer, there is not a separate Firmware
Printer?	upgrade for the Printer Server. (Note: Therefore, the
	upgrades are done with the main Printer Firmware.)
What is the default User	The default passwords are blank (e.g., an empty string).
name and password for	•	The default Users are as follows: root as the
the Printer?
		administrative User and guest as a non-administrative
		User.
	•	The supports two (2) Users.

Continued on the next page

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 6-69