FARGO electronic HDPii Cleaning the Printer Platen Roller and Card Feed Rollers, Display a below

RESTRICTED USE ONLY Fargo Electronics, Inc.

Cleaning the Printer Platen Roller and Card Feed Rollers

Perform this procedure approximately every 1,000 prints to maintain a consistent print quality. (Note: The Card Feed Rollers move the card throughout the print process. Rollers should be kept clean to prevent card jams and card contamination. This cleaning process will ultimately lead to better print quality and extended Printhead life.)

Step	Procedure
1	From the Driver, click on the Toolbox button to bring up the Clean Printer tab.
2	Follow the instructions from the CLEAN PRINTER tab on the Driver. See
	Display A below.
	(Note: If your Printer is equipped with a Magnetic Encoder, you must insert
	the Cleaning Card with the printed side up and with a small Liner Strip towards
	the front of the Printer. See Display B below.)
3	After the cleaning process is completed, the Cleaning Card will exit the Printer
	at the Input Hopper.
4	Replace the printing supplies and close the Print Stations after the Rollers are
	clean and completely dry.

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 10-32