Invacare XLT Gold, XLTPRO, XLT Jr, Force Installing the Water Bottle, Installing/Using the Tow Bar

SECTION 9—OPTIONS

Installing the Water Bottle

NOTE: For this procedure, refer to FIGURE 9.2.

1. Secure the water bottle mounting tube to the seat frame using the hardware provided.

NOTE: Make sure that the water bottle mounting bracket mounting holes are facing downward.

2.Attach the water bottle mounting bracket to the mounting tube using the hardware provided.

3.Push water bottle into mounting bracket until secure.

Seat Frame	Mounting Tube
Mounting	Water
	Bottle
Bracket

FIGURE 9.2 Installing the Water Bottle

Installing/Using the Tow Bar

NOTE: For this procedure, refer to FIGURE 9.3.

NOTE: The tow bar will not work with wheelchairs with swingaway front riggings. Only rigid wheelchairs with a tubular style footrest can be towed using the tow bar.

1.Remove the two set screws on each mounting bracket.

2.Position the mounting brackets around the handcycle rear frame.

NOTE: Make sure that the tow bar is centered on the handcycle rear frame.

3.Using two set screws for each mounting bracket, secure the mounting brackets to the handcycle rear frame.

4.Secure the tow bar to the handcycle with the mounting brackets and set screws.

5.Secure the wheelchair to the tow bar with the fastening strips provided.

Fastening Strip Tow Bar

Mounting

Bracket

Set Screws

Handcycle

Rear Frame

FIGURE 9.3 Installing/Using the Tow Bar

Part No 1114850 61 Recumbent Handcycle Series