Invacare XLTPRO, Top End XLT Jr manual Adjusting Seat Fore/Aft - XLT Gold and Top End Force Only

SECTION 6—RIDING POSITION

Adjusting Seat Fore/Aft - XLT Gold and Top End Force Only

NOTE: For this procedure, refer to FIGURE 6.7.

NOTE: Seat should be adjusted so that when seated with feet in the footrests, there is a slight bend at the knee and a slight bend at the elbow when the hand pedal is furthest away.

1.Remove the seat upholstery. Refer to Replacing Seat Upholstery on page 58.

2.Loosen, but DO NOT remove the two mounting bolts and locknuts securing the two back clamps to the seat rails.

3.Slide back clamps for (forward) or aft (rearward) along the seat rails to desired seat position.

4.Securely tighten the two mounting bolts and locknuts securing the two back clamps to the seat rails.

5.Reinstall the seat upholstery. Refer to Replacing Seat Upholstery on page 58.

6.If necessary adjust the back angle.

Mounting Bolt

and Locknut

Seat Rails

Back Clamp

FIGURE 6.7 Adjusting Seat Fore/Aft - XLT Gold and Top End Force Only

Part No 1114850 37 Recumbent Handcycle Series