Invacare XLTPRO, Top End XLT Jr, Top End XLTTM, Top End ForceTM manual Using the Handcycle Rack

SECTION 9—OPTIONS

8.Using two mounting bolts and locknuts, secure the rear wheel bar to the wheel tray.

9.Install the receiver onto the trailer hitch of the vehicle, according to the vehicle manufacturerʹs instructions.

Using the Handcycle Rack

1.Position the handcycle on the rack with the front wheel in the wheel tray bracket.

2.Adjust the handcycle rack so the wheel tray bracket sits against the front wheel and the rear wheel bar brackets sit against the rear wheels. Refer to Adjusting the Handcycle Rack on page 73.

3.Secure the front wheel to the wheel tray bracket using the strap provided.

4.Secure the rear wheels to the rear wheel bar using the straps provided.

	Rear Wheel	Mounting Bolts
	Bar	and Locknuts
		Screws
Receiver	Small Mounting
	Bolts and Locknuts
		Large Mounting
		Bolts and Locknuts
	Bracket		Rear Wheel
		Wheel Tray	Bar Bracket
Wheel Stop
Wheel Stop	Mounting Bolt
Mounting	and Locknut

Positions

Wheel Tray Bracket

Mounting Bolts

and Locknuts

FIGURE 9.18 Assembling/Using/Adjusting the Handcycle Rack

Recumbent Handcycle Series 72 Part No 1114850