Invacare XLT Gold, XLTPRO, XLT Jr Installing the Rear Wheels with Threaded Axles, Tire Pressure

SECTION 7—WHEELS

Installing the Rear Wheels with Threaded Axles

NOTE: For this procedure, refer to FIGURE 7.2.

1.Apply a small amount of grease onto the axle.

2.Insert the axle into the axle mounting hole on the handcycle frame.

3.Securely tighten the axle to the frame.

Axle

Mounting

Hole

Frame

Axle

¼-inch Allen

Wrench

Rear Wheel

FIGURE 7.2 Installing the Rear Wheels with Threaded Axles

Replacing Tire/Tube and Tuning/Replacement of Spokes

NOTE: Invacare recommends that these procedures be performed by a qualified technician.

Tire Pressure

WARNING

DO NOT use the handcycle unless it has the proper tire pressure (p.s.i.). DO NOT overinflate the tires. Failure to follow these suggestions may cause the tire to explode and cause bodily harm. Tire p.s.i. is printed on the tire wall.

Part No 1114850 43 Recumbent Handcycle Series